AS-01
IMO SIGNS
AS-01 IMO Signs are produced on Dura-Plate material – photoluminescent multilayer material specially designed for the production of luminous signage and LLL system.
AS-01 IMO Signs are produced on Dura-Plate material – photoluminescent multilayer material specially designed for the production of luminous signage and LLL system.
The extensive range of AS01 IMO Signs is available on Dura-Plate material, which is based on a semi-rigid and self-extinguishing PVC. This multilayer structure protects the print and luminous layer against UV rays, sea water, mechanical damage and harsh marine conditions. The signs are equipped with a self-adhesive foam of excellent adhesive properties, which ensures strong bond to a wide range of surfaces, also to the uneven ones.
Our photoluminescent signage is approved by DNV with MED mark of conformity, which guarantees the highest quality standards for the marine industry. They comply with the following standards and regulations:
We offer eco-friendly, latex-based prints as a differentiation, also for sustainable sourcing.
Made of materials with an enhanced fire resistance
High afterglow performance
Non-toxic and
non-radioactive
Temperature resistance
from -30°C to +65°C
Excellent adhesive properties
Suitable for external use
Protective foil removable
after installation
Printed area secured
with a transparent plastic
DURAPLATE is our self-developed multilayer material specially designed for the production of luminous signage and LLL system.
It is manufactured on the basis of the semi-rigid and self-extinguishing PVC which protects the luminous layer against mechanical damages and UV rays. The additional protective foil is especially useful to avoid scratches which may be caused during renovation or painting works on board a vessel. The foil can be peeled off just before the ship commissioning.
DURAPLATE is equipped with a soft, self-adhesive foam, which allows for installation on a wide range of surfaces. All components are non-toxic and non-radioactive. The material is MED-approved and classified as flame retardant according to IEC 60092-101:2001 regulation.
Base materials | 0,5 mm transparent PVC; self-adhesive polyethylene foam |
Thickness | 1,5 mm (with adhesive layer) |
Service temperature | -30°C to +65°C (-22°F to +149°F) |
Surface preparation | Yes |
Mounting method | Excellent |
UV resistance | >26 |
Weather resistance | Excellent |
Chemical resitance | Very Good |
Sea water resistant | Yes |
Workable life (indoor) | 10 years |
Workable life (outdoor) | 3-5 years |
The extensive range of AS01 IMO Signs is available on Dura-Plate material, which is based on a semi-rigid and self-extinguishing PVC. This multilayer structure protects the print and luminous layer against UV rays, sea water, mechanical damage and harsh marine conditions. The signs are equipped with a self-adhesive foam of excellent adhesive properties, which ensures strong bond to a wide range of surfaces, also to the uneven ones.
Our photoluminescent signage is approved by DNV with MED mark of conformity, which guarantees the highest quality standards for the marine industry. They comply with the following standards and regulations:
We offer eco-friendly, latex-based prints as a differentiation, also for sustainable sourcing.
Made of materials with an enhanced fire resistance
High afterglow performance
Non-toxic and
non-radioactive
Temperature resistance
from -30°C to +65°C
Excellent adhesive properties
Suitable for external use
Protective foil removable
after installation
Printed area secured
with a transparent plastic
DURAPLATE is our self-developed multilayer material specially designed for the production of luminous signage and LLL system.
It is manufactured on the basis of the semi-rigid and self-extinguishing PVC which protects the luminous layer against mechanical damages and UV rays. The additional protective foil is especially useful to avoid scratches which may be caused during renovation or painting works on board a vessel. The foil can be peeled off just before the ship commissioning.
DURAPLATE is equipped with a soft, self-adhesive foam, which allows for installation on a wide range of surfaces. All components are non-toxic and non-radioactive. The material is MED-approved and classified as flame retardant according to IEC 60092-101:2001 regulation.
Base materials | 0,5 mm transparent PVC; self-adhesive polyethylene foam |
Thickness | 1,5 mm (with adhesive layer) |
Service temperature | -30°C to +65°C (-22°F to +149°F) |
Surface preparation | Yes |
Mounting method | Excellent |
UV resistance | >26 |
Weather resistance | Excellent |
Chemical resitance | Very Good |
Sea water resistant | Yes |
Workable life (indoor) | 10 years |
Workable life (outdoor) | 3-5 years |
© 2021 A-SPE Europe tel. +48 55 2367736 mail: info@a-spe.com