Economy Dura Markers
Advanced Dura Markers
Pre-coiled Dura Markers
|Service temperature||-40°C to +80°C||-40°C to +130°C||-40°C to +130°C|
|Mounting method||Self-adhesive||Self-adhesive||Pre-coiled, self-bonding|
|Weather resistance||Very good||Excellent||Excellent|
|Chemical resistance||Good||Very good||Excellent|
|Sea water resistance||Yes||Yes||Yes|
|Reuse after removing||No||No||Yes|
|Service lifetime||3-8 years*||5-10 years*||5-10 years*|
About Economy Pipe Markers
A cost-effective solution dedicated for indoor and outdoor use in areas with limited exposure to direct sunlight and adverse weather conditions. It offers fair durability, good flexibility and a service temperature up to 80°C.
The great benefit of AS10 Economy Dura Markers is that even this basic pipe marking line ensures protection against aging and mechanical damages by the additional process of overcoating of the printed surface with a protective varnish. This is a significant advantage of Economy Dura Markers over typical printing methods available on the market. Self-adhesive markers are equipped with pressure sensitive acrylic adhesive and protective release liner. Recommended for newly installed pipes.
All our tapes and markers are digitally printed at an ISO:9001 approved facility with the use of materials of the first-rate quality to ensure the best performance in the most demanding environments.
Additional protective overcoating of the printed surface
reduces paint aging and inproves scratch-resistance.
Norms and Standards
A-SPE pipe identification labels can be produced in accordance with the specific requirements of our customers and can be designed to comply with one of the following regulations:
A-SPE tapes and markers can be printed in any language based on translation provided by a customer. Each pipe marker is dedicated to a particular pipe diameter.
AS10 is available in cut-to-size markers or 25m long rolls,
in the following options:
- with/ without directional arrows
- any custom texts, graphics or QR codes
- custom widths on demand
fair resistance to weather conditions and UV rays
economical and easy to use
custom production with any texts and graphics
high quality acrylic adhesive
|Service temperature||-40°C to 80°C|
|Weather resistance||Very Good|
|Sea water resistance||Yes|
|Reuse after removing||No|
|Service lifetime*||3-8 years|
Important: During application the tape should overlap 3-4 cm
Properly installed markers serve for many years and improve the level of occupational safety, helping to reduce the amount of downtime and accidents.
According to the ISO 14726:2008 regulation, the following points should be considered during the installation of pipe markers:
- Markers should be installed within a 3-5m distance between each marking point on a horizontal and vertical pipeline. Branched pipes or close proximity to pipes carrying different media may require a more frequent marking.
- In case of valves, markers should be installed at a distance of approx. 75mm from the corresponding flange.
- Markers should be mounted at all penetration points in walls, bulkheads or decks.
- Markers should be installed on each side of the pipe branch.
- In case of a vertical piping system, markers should be applied at a height of approx. 170cm to ensure good visibility.
The exact estimation of the quantity of markers and installation points is determined at the stage of material preparation. A-SPE specialists can offer you professional advice based on the provided pipeline scheme and detailed specifications.