Product decription
AS-51 Anti-Slip Tape helps to prevent accidental slips and falls due to its special slip-resistant surface. It is a convenient and economical solution improving safety standards in slip hazard areas. It adheres to any surface providing increased traction for better safety.
Anti-Slip Tape is suitable for indoors and outdoors to be used on walkways, stairways, ladders, ramps and steps in warehouses, industrial facilities and marine docks. Can be especially helpful in areas that get extra slick when wet or moist. Quick and easy to apply.
Anti-Slip tapes are available in two versions:
HS (Hard Surface tapes) – excellent anti-slip and wear-resistant texture, suitable for heavy-traffic areas.
Note* their rough surface is difficult in cleaning and cannot be washed with mops.
SS (Soft Surface tapes) – are a mop-friendly solution, they offer considerably lower anti-slip properties, however they are much easier in maintenance and cleaning.
Technical details
Overall thickness | 1,3mm |
Composition | PVC upper and PET base |
Operating temperature | From -10˚C to 80˚C |
Adhesive | 5,714 kg/25,4mm |
Adhesion to steel | 6,25 (kg/25,4mm) |
Tackloop | 2812↑ (minutes/25 ˚C) |
Cohesion | Excellent |
Resistance to water, chemicals, motor oil | 24 months* |
Shelf life | 36 months |
Product durability | 36 months |
Availability

white
ANTI-SLIP SOFT-SURFACE tape
ORDER CODE – DIMENSIONS
AS-51/50×18(W) – 50 mm x 18 m roll
AS-51/100×18(W) – 100 mm x 18 m roll

BLACK
ANTI-SLIP SOFT-SURFACE tape
ORDER CODE – DIMENSIONS
AS-51/50×18(B) – 50 mm x 18 m roll
AS-51/100×18(B) – 100 mm x 18 m roll

TRANSPARENT
ANTI-SLIP SOFT-SURFACE tape
ORDER CODE – DIMENSIONS
AS-51/50×18(T) – 50 mm x 18 m roll
AS-51/100×18(T) – 100 mm x 18 m roll
Installation instructions
- Make sure that the surface is smooth, clean and dry, free of oils, sand or dust.
- Release a small piece of the release paper.
- Apply the first part of the tape to the surface and continue removing the release foil gradually.
- The full adhesive strength is achieved 48 hours after installation. Try to avoid heavy use of the tape during this time.
- In view of the many types of the surfaces where the anti slip tapes can be applied,the final user should perform his own tests to ensure that the product is suitable for his application and that meets his demands.
Maintenance and storing
24 months shelf life when stored properly – in original box, at temperature 10-25 ˚C. Product durability 36 months.
Product decription
AS-51 Anti-Slip Tape helps to prevent accidental slips and falls due to its special slip-resistant surface. It is a convenient and economical solution improving safety standards in slip hazard areas. It adheres to any surface providing increased traction for better safety.
Anti-Slip Tape is suitable for indoors and outdoors to be used on walkways, stairways, ladders, ramps and steps in warehouses, industrial facilities and marine docks. Can be especially helpful in areas that get extra slick when wet or moist. Quick and easy to apply.
Anti-Slip tapes are available in two versions:
HS (Hard Surface tapes) – excellent anti-slip and wear-resistant texture, suitable for heavy-traffic areas.
Note* their rough surface is difficult in cleaning and cannot be washed with mops.
SS (Soft Surface tapes) – are a mop-friendly solution, they offer considerably lower anti-slip properties, however they are much easier in maintenance and cleaning.
Technical details
Overall thickness | 1,3mm |
Composition | PVC upper and PET base |
Operating temperature | From -10˚C to 80˚C |
Adhesive | 5,714 kg/25,4mm |
Adhesion to steel | 6,25 (kg/25,4mm) |
Tackloop | 2812↑ (minutes/25 ˚C) |
Cohesion | Excellent |
Resistance to water, chemicals, motor oil | 24 months* |
Shelf life | 36 months |
Product durability | 36 months |
Availability

white
ANTI-SLIP SOFT-SURFACE tape
ORDER CODE – DIMENSIONS
AS-51/50×18(W) – 50 mm x 18 m roll
AS-51/100×18(W) – 100 mm x 18 m roll

BLACK
ANTI-SLIP SOFT-SURFACE tape
ORDER CODE – DIMENSIONS
AS-51/50×18(B) – 50 mm x 18 m roll
AS-51/100×18(B) – 100 mm x 18 m roll

TRANSPARENT
ANTI-SLIP SOFT-SURFACE tape
ORDER CODE – DIMENSIONS
AS-51/50×18(T) – 50 mm x 18 m roll
AS-51/100×18(T) – 100 mm x 18 m roll
Installation instructions
- Make sure that the surface is smooth, clean and dry, free of oils, sand or dust.
- Release a small piece of the release paper.
- Apply the first part of the tape to the surface and continue removing the release foil gradually.
- The full adhesive strength is achieved 48 hours after installation. Try to avoid heavy use of the tape during this time.
- In view of the many types of the surfaces where the anti slip tapes can be applied,the final user should perform his own tests to ensure that the product is suitable for his application and that meets his demands.
Maintenance and storing
24 months shelf life when stored properly – in original box, at temperature 10-25 ˚C. Product durability 36 months.