repairing leak in copper pipe using black anti leak tape silicone

Anti-Leak Silicone Tape

Suitable for plumbing and marine applications.
Wide temperature range from -45°C to 200°C.

Multi-purpose Silicone Tape

MF50 Anti Leak is a universal, self-fusing silicon tape for emergencies and all-purpose repairs.

MF50 can be applied on a wide range of surfaces and is versitile in use, including leaking pipes and hoses, electrical connections, cables, hand tool handles and much more.

Anti Leak Tape is resistant to:

fuel

water

oils

acids

solvents

compressed air filter with pressuse clock and pipe repaired with black anti leakt tape silicone

How it works

The tape creates a permanent air-tight and water-tight seal immediately after application. It ensures anti-corrosive and electrical protection. It is very easy to remove and leaves no sticky residue.

leak in copper pipe on orange background

black antileak tape silicone on copper pipe on orange background

Availability

Anti-Leak Silicone Tape
MF50-25
Dimension
25 mm x 5 m
Weight
90 g
Amount in a box
24 rolls
IMPA Code*
81 21 75
Anti-Leak Silicone Tape
MF50-38
Dimension
38 mm x 5 m
Weight
130 g
Amount in a box
16 rolls
IMPA Code*
81 21 75
Anti-Leak Silicone Tape
MF50-50
Dimension
50 mm x 5 m
Weight
170 g
Amount in a box
12 rolls
IMPA Code*
81 21 75

* code of similar product

Explore Anti-Leak Silicone Tape:
A Visual Guide

Discover the versatility of our Anti-Leak Silicone Tape, ideal for swift and reliable sealing.

Installation instructions

Clean the surface from dirt, oil etc. before the application.
Attach the beginning of the tape close to the damaged area and start wrapping around (with tension).
Keep stretching the tape until a 50% overlap is achieved. Once overlapped, the tape will fuse.
Finish the wrapping around the problem area and press the tape firmly into place.
For high pressure leaks, additional wrapping may be required. Most hose repairs can be repaired with 3-5 layers by wrapping 3 to 5 inches in each direction away from the leak point; however, additional strength can be added simply by wrapping more layers of the MF50 tape.
For electrical wiring, it is not necessary to stretch tightly. In fact, it will be more resilient to abrasion when it is not stretched too tightly.
Removing: Cut the tape using scissors or knife.

Technical details

Material TypeSilicone rubber
LinerPE film
Thickness0,5 mm
Temperature range - continuous-45°C to 200°C
Temperature range - intermittent-65°C to 260°C
Specific Gravity1,25 g/ml
Tensile Strength700 psi min
Elongation400% min
Dielectric strength400 Vpm min
Volume resistivity1 x 1013 OHMs/cm
Pressure resistanceApproximately 10 – 12* bars