AS64
Sealing Mass
Synthetic sealant mass for sealing and anti-corrosion protection.
AS64
Product description
Files
Product description
Product decription
Excellent adhesion to concrete, ceramic, plastic and metal surfaces; pernamently plastic, it does not harden over tme. Use in low voltage up to 1000V. Dielectric properties tested in accordance to EN-06043-1, IEC 60250.
Physical properties
| Operating temperature: | -15 ÷ +50 >C |
| Application temperature: | +10 ÷ +35 C |
| Density: | 1,46 kg/dm3 |
| Water absorption: | < 0,035 %mas |
| Breakdown voltage: | 7,2 kV/mm |
| Volume resistivity: | 1,4*1012 Ωm |
| Flash point: | > 238 C |
| Adhesion to concrete and plastics: | Cohesive fracture (tearing in the layer) |
Advantages
- Synthetic product of exceptional sealing properties.
- Viscoelastic, does not harden, always plastic.
- Corrosion protection properties.
- Very good dielectric properties.
- High adhesion to concrete, ceramic, metal surfaces and plastics.
- Requires minimal surface preparation.
- Easy and fast application.
- Tightly lls the whole space, prevents and blocks the access of water, gas, smoke and moisture from inside the building.
- Free of components hazardous to human health and natural environment.
Features
SPECIFIC RESISTANCE
1,4*1012 ΩM
OPERATING TEMPERATURE
-15oC to +50oC
WATER SEALING
PROPERTIES
NON TOXIC
ENVIRONMENTAL SAFE
Installation instructions
- Clean the surface from dirt, oil etc. before the application.
- Attach the beginning of the tape close to the damaged area and start wrapping around (with tension).
- Keep stretching the tape until a 50% overlap is achieved. Once overlapped, the tape will fuse.
- Finish the wrapping around the problem area and press the tape firmly into place.
- For high pressure leaks, additional wrapping may be required. Most hose repairs can be repaired with 3-5 layers by wrapping 3 to 5 inches in each direction away from the leak point; however, additional strength can be added simply by wrapping more layers of the MF50 tape.
- For electrical wiring, it is not necessary to stretch tightly. In fact, it will be more resilient to abrasion when it is not stretched too tightly.
REMOVING:
Cut the tape using scissors or knife.
Maintenance and storing
Shelf life of MF50 is at least 5 years from date of dispatch by Mareflex, when stored in the original box at 21°C and 50% relative humidity.
Product video
Files
Product description
Files
Product description
Product decription
Excellent adhesion to concrete, ceramic, plastic and metal surfaces; pernamently plastic, it does not harden over tme. Use in low voltage up to 1000V. Dielectric properties tested in accordance to EN-06043-1, IEC 60250.
Physical properties
| Operating temperature: | -15 ÷ +50 >C |
| Application temperature: | +10 ÷ +35 C |
| Density: | 1,46 kg/dm3 |
| Water absorption: | < 0,035 %mas |
| Breakdown voltage: | 7,2 kV/mm |
| Volume resistivity: | 1,4*1012 Ωm |
| Flash point: | > 238 C |
| Adhesion to concrete and plastics: | Cohesive fracture (tearing in the layer) |
Advantages
- Synthetic product of exceptional sealing properties.
- Viscoelastic, does not harden, always plastic.
- Corrosion protection properties.
- Very good dielectric properties.
- High adhesion to concrete, ceramic, metal surfaces and plastics.
- Requires minimal surface preparation.
- Easy and fast application.
- Tightly lls the whole space, prevents and blocks the access of water, gas, smoke and moisture from inside the building.
- Free of components hazardous to human health and natural environment.
Features
SPECIFIC RESISTANCE
1,4*1012 ΩM
OPERATING TEMPERATURE
-15oC to +50oC
WATER SEALING
PROPERTIES
NON TOXIC
ENVIRONMENTAL SAFE
Installation instructions
- Clean the surface from dirt, oil etc. before the application.
- Attach the beginning of the tape close to the damaged area and start wrapping around (with tension).
- Keep stretching the tape until a 50% overlap is achieved. Once overlapped, the tape will fuse.
- Finish the wrapping around the problem area and press the tape firmly into place.
- For high pressure leaks, additional wrapping may be required. Most hose repairs can be repaired with 3-5 layers by wrapping 3 to 5 inches in each direction away from the leak point; however, additional strength can be added simply by wrapping more layers of the MF50 tape.
- For electrical wiring, it is not necessary to stretch tightly. In fact, it will be more resilient to abrasion when it is not stretched too tightly.
REMOVING:
Cut the tape using scissors or knife.
Maintenance and storing
Shelf life of MF50 is at least 5 years from date of dispatch by Mareflex, when stored in the original box at 21°C and 50% relative humidity.
Product video
Files
