Floor Safety Signs

Floor safety signs with anti-slip textured surface and excellent visibility for clear hazard and evacuation marking in industrial and public areas.

Floor Signs Catalogue

Highly Visible 
Anti-slip Safety Signs for Floor Markings 

Floor safety signs are used to mark hazards, guide movement and improve safety awareness directly at ground level. They help reduce the risk of slips, trips and unsafe access by displaying clear visual information in areas where immediate attention is required. When applied to pedestrian walkways, floor signs support traffic flow and highlight zones that require caution, directional guidance or restricted access.

Long-term durability of the printed graphic 

Enhanced anti-slip protection

Resistant to UV, scratches and abrasion

Strong adhesion to flat floor surfaces

Photoluminescent Signs for emergency visibility

Suitable for pedestrian 
traffic and occasional light vehicle traffic

Durable Floor Signs for Long Service Life

A-SPE Floor Signs are durable adhesive floor labels designed to provide high visibility and anti-slip performance without rapid wear. Their embossed anti-slip laminate improves underfoot traction and protects the printed graphic against abrasion, scratching and UV exposure. 

Floor signs are backed with a strong adhesive to ensure secure bonding to flat surfaces and to prevent edge lifting, peeling or movement during use.
This combination of protective laminate and high-performance adhesive helps maintain the sign’s legibility and durability over time in areas exposed to regular foot traffic.

Standards & Compliance

Photoluminescent versions comply with the luminance testing requirements of DIN 67510-1:2020.
Where applicable, safety pictograms are based on ISO 7010 / EN ISO 7010 registered safety symbols.
Safety colours and sign layouts are designed with reference to ISO 3864-1 principles.
For marine applications, applicable safety signs may support shipboard safety marking systems designed with reference to ISO 24409-1:2020.

Product Lines 

Anti-slip Floor Signs are available in two material options: Standard and Photoluminescent, to address different safety marking needs. Both variants offer the same anti-slip surface, permanent acrylic adhesive and expected indoor service life, while differing in visibility performance and material construction. The choice between Standard and Photoluminescent floor signs depends on whether visibility is required only under normal lighting conditions, or must also be maintained during emergency power failures when regular lighting is no longer available.

Standard Anti-slip Floor Signs

Standard Floor Signs are intended for use in normally lit areas where permanent floor marking is required for hazard indication, traffic control or zone identification. Suitable for everyday use in industrial, commercial and public environments for clear visual marking.

Construction:
1. Anti-slip laminate 
2. Base material
3. Permanent acrylic adhesive

Typical Applications:
Warehouses and storage areas
Factories and production zones
Internal pedestrian walkways
Loading and packing areas
Airports and transport terminals
Public buildings and commercial interiors 
(e.g. schools, hospitals, shopping malls, exhibition venues)

When to Use: Select Standard Anti-slip Floor Signs for applications where visibility during power failure or blackout conditions is not required.

Photoluminescent Anti-slip Floor Signs

PSPA Class C Photoluminescent Floor Signs are charged by natural or artificial light and provide visible afterglow when the light source is removed. Their Class C rating confirms high photoluminescent performance, helping floor markings remain visible long enough to support safe evacuation when regular lighting is no longer available. They are intended for applications where floor marking must remain visible during power failure, lighting failure or blackout conditions. 

Construction:
1. Anti-slip laminate
2. Photoluminescent base material
3. Permanent acrylic adhesive

Typical Applications:
Escape routes and emergency egress paths
Exit access areas
Emergency exits
Fire safety equipment locations
Industrial facilities and public buildings where emergency visibility is required

When to Use: Select Photoluminescent when signs must remain visible during power failure or blackout conditions.

Availability

Our safety signs are available in four different size options and two shapes. Standard is: Round L 430mm

  • Round S

    Circle shape,  
    230 mm, approx. 9"

  • Round M

    Circle shape,  
    300 mm, approx. 12"

  • Round L

    Circle shape,  standard
    430 mm, approx. 17"

  • Round XL

    Circle shape,  
    610 mm, approx. 24"

  • Square S

    Square shape,  
    230 mm, approx. 9"

  • Square M

    Square shape,  
    300 mm, approx. 12"

  • Square L

    Square shape,  
    430 mm, approx. 17"

  • Square XL

    Square shape,  
    610 mm, approx. 24"

Sign Categories & Catalog

Exit & Emergency Egress

Photoluminescent Floor Signs are used to support evacuation by identifying emergency escape routes and fire exits at floor level.  All signs in this category provide reliable guidance during blackout conditions, power failures or emergency situations where regular lighting is unavailable.

  •  Rotatable Arrow

    AS03-E001

  • Exit Arrow Right

    AS03-E002

  • Exit Arrow Left

    AS03-E003

  • Exit Arrow Up

    AS03-E004

  • Emergency Exit

    AS03-E005

  • Fire Exit

    AS03-E006

  • Eye Wash

    AS03-E007

  • Eye Wash 
    Do Not Block

    AS03-E008

  • First Aid

    AS03-E009

  • Emergency Equipment

    AS03-E010

  • Emergency Shower

    AS03-E011

  • AED Defibrillator

    AS03-E012

Traffic & Warehouse Control

Warehouse and facility traffic control signs manage pedestrian and internal traffic flow in operational areas. Typical messages cover forklift traffic, pedestrian-only routes, stop points and directional guidance. These signs are applied where clear floor-level communication helps reduce the risk of collisions, improve movement through the facility, and support safer organisation of warehouse and logistics areas.

  • STOP

    AS03-TW001

  • STOP, 4 WAY

    AS03-TW002

  •  Rotatable Arrow

    AS03-TW003

  • One Way Arrow

    AS03-TW004

  • Caution Forklift Trucks

    AS03-TW005

  • Warning Forklift Traffic

    AS03-TW006

  • Keep Aisles Clear

    AS03-TW007

  • Pedestrian Traffic Only

    AS03-TW008

  • Shipping & Receiving Zone

    AS03-TW009

  • Loading - Unloading Area

    AS03-TW010

PPE Zone Markers

Personal protective equipment floor signs identify areas where specific safety equipment must be worn before entry. They provide a clear visual indication of PPE requirements and help reinforce safety rules at access points, workstations and controlled operational areas.

  • Safety Glasses Must Be Worn

    AS03-PE001

  • Helmet Must Be Worn

    AS03-PE002

  • Safety Boots Must Be Worn

    AS03-PE003

  • Ear Protection Must Be Worn

    AS03-PE004

  • High Visibility Clothing Must Be Worn

    AS03-PE005

  • Face Shield Must Be Worn

    AS03-PE006

  • Gloves Must Be Worn

    AS03-PE007

  • Protective Clothing Must Be Worn

    AS03-PE008

Hazard & Warning Signs

Hazard and warning floor signs identify hazards, warn against unsafe access and communicate caution messages in areas where immediate visual recognition is required. Applied at key points of movement, these signs help improve hazard awareness, support safer pedestrian behaviour, and reinforce site safety rules in operational and public-access areas. They are commonly used in high-traffic walkways, doorways, access points and other locations where clear floor-level warning is needed.

  • No Entry
    Restricted Area

    AS03-H001

  • Danger
    High Voltage

    AS03-H002

  • Electrical Panel
    Keep Clear 1m

    AS03-H003

  • Warning
    Chemical Storage

    AS03-H004

  • Caution
    Mind The Step

    AS03-H005

  • Caution 
    Slippery When Wet

    AS03-H006

5S & Workplace Organisation

This category includes floor signs used for 5S marking, workplace organisation, equipment location marking and identification of storage areas to maintain clear visual order across operational areas. Such signs support more consistent layout control by clearly indicating where equipment, materials and workplace items should be placed or stored. Typical applications include manufacturing, warehousing and logistics environments, where visual management and organised workflow are essential.

  • Forklift Parking

    AS03-5S001

  • Pallet Jack Parking

    AS03-5S002

  • Trash Can

    AS03-5S003

  • Recycle

    AS03-5S004

  • Cleaning Supplies

    AS03-5S005

  • Tool Storage

    AS03-5S006

Technical details